VaporFi Rocket 3 Review

VaporFi Rocket 3 Review

8.6 Total Score
VaporFi Rocket 3 Review Bottom Line

The VaporFi Rocket 3 is very solidly built. A much-upgraded version from its predecessor. The tank is very well designed so as its components. The combination of 3.5ml capacity tank, 2500mAh internal battery, and 0.5-ohm resistance atomizer makes an enormous clouds and providing deep and rich flavor.

Recommended store: Buy directly from VaporFi Official Store.


In-Depth VaporFi Rocket 3 Review:

An upgraded version of the Rocket, the VaporFi Rocket 3 starter kit is a small device packing a big punch. Constructed of stainless steel this device provides users with a durable lasting product that compromising convenience or ease of use. The combination of 3.5ml vape juice capacity tank, a 2500mAh internal battery, and a 0.5-ohm resistance atomizer makes enormous clouds that are direct to lung hit, providing deep and rich flavor.

First Impression

Ok, when I first open the box of this unit. I was amazed by its size – it’s Huge and Heavy. Just like its predecessor, the Rocket. But unlike its older brother that was released a couple of years ago this version was truly modified and upgraded. Instead of choosing only from classic two tank and battery colors (black and stainless steel), now you can choose either from 6 different colors. Also, they address the leakage issue that was circling around at the original version. They also upgraded the much high-lightened feature of the original Rocket; its battery life, and capacity tank. Now, it’s much bigger and provides substantial battery life for long term use with its 2500mAh battery along with a convenient Top Fill Tank Design that has a vape juice capacity of 3.5ml.

But the biggest flaw (I think) for this big leap by VaporFi – is it no longer included in the box the 5 replacement atomizers with 1.8 Ohm resistance. Now, The Rocket 3 sub-ohm tank only comes with a 0.5ohm pre-installed atomizer as well as one additional 0.1 ohm Ni200 atomizer. Also, the variable voltage output of Rocket 3 is now 3.7V compared to its predecessor which you can adjust it from 3.2V up until 4.8V. But that being said, it still packs a punch and creates big clouds.

What’s in the box

As a starter kit, you get essentially everything you need to begin vaping. You get:

  • 1 Rocket 3 Tank (with pre-installed 0.5 ohm Atomizer)
  • 1 Rocket 3 2500mAh Battery
  • 1 Additional Rocket 3 Ni200 0.1 ohm Atomizer
  • 1 Micro USB Charging Cable
  • 2 Pack of O-Rings
  • User Manual

The Rocket 3 Battery

Thou, they degrade their ohm resistance from 1.8 to 0.5. This is not really a big deal for they also reduce the VV output to 3.7V which still delivers lots of great vapor and can easily handle 24-48 hours of vaping with this battery.

If the Rocket has a plenty of power and life to supply up to 4.8V with its 1600mAh. The Rocket 3 can top it all with 2500mAh. When I tested the VaporFi Rocket 3 this vaporizer turned into a smokehouse immediately and this is using a battery that wasn’t fully charged. I use it for testing straight out of the box!

It still has a standby mode – if the firing button is accidentally engaged for more than ten seconds, the battery will automatically cut out. Simply press the button once to turn on the battery back on.

Five rapid power – button clicks turn the battery On or Off. You’ll also need to press it for each draw.

Depending on your use, the battery still lasts a full day or more. Recharging takes up to only an hour.

VaporFi Rocket 3 Starter KitThe Rocket 3 Tank and Atomizer

VaporFi still recommends only filling the tank about 75% full, to avoid leaking and refilling at about 25% capacity to avoid a burned taste.

The Rocket 3 features a BCC “Bottom Coil” 0.5Ohm atomizers with only one additional Ni200 0.1Ohm atomizer. Yes, we all know that using BCC atomizer is susceptible to leaks and gurgling, if not attached properly. But these issues are the thing of the past now, for the Rocket 3 has a Top Fill Tank Design with 3.5ml capacity that addresses/solve this issues and for the convenience of the users on-the-go.

Note: VaporFi cautions users to not over-tightening the tank nor the atomizer as this can result in breaking the O-ring seal.

Maintenance and care

Keeping your device cleaned and well maintained is essential. Periodically, wipe your device to prevent any dust or particles from entering the device and keeping it away for any liquids. Clean the fire tank connector regularly with a Q-tip, Removing any liquid or gap build up to ensure you have a solid connection with your atomizers.

What I think

The VaporFi Rocket 3 is very solidly built. The tank is very well designed and all of the components attach are exceptionally well. This is an excellent engineering. The only concern was the power button. We would like to see it recessed slightly to help prevent any accidental activations. Other than that, we were just excited to try this beast!

I recommend purchasing the VaporFi Rocket 3 Starter Kit directly from VaporFi. Buying from the manufacturer is always the safest option.

VaporFi Rocket 3 Starter Kit

Buy the VaporFi Rocket 3 Starter Kit directly to its manufacturer for safety purposes

$49.99

We will be happy to hear your thoughts

Leave a reply

Register New Account
Reset Password