SMOK OSUB Plus Kit Review

Best Deal: $49.90 from VapeSourcing
or search on amazon

SMOK OSUB Plus Kit Review

9.3 Total Score
SMOK OSUB Plus Kit Review Bottom Line

The SMOK OSUB Plus 80W Kit combines the OSUB Plus 80W mod with the Brit Beast Sub-Ohm Tank that utilizes the coil heads of the infamous TFV8 Baby Beast. The chassis of the OSUB Plus 80W mod accommodates a large 3300mAh battery that can last a decent amount of time. It also integrates a firing bar mechanism that makes handling simple and easy to use. Output ranges from 1 - 80W; a well-built 80W box mod.

Recommended store: Buy from an Authorized Dealer - VapeSourcing.

Get exclusive coupon codes to most US vape stores. To get the latest releases and exclusive discount. ? Sign up here >>

In-Depth SMOK OSUB Plus Kit Review:

SMOKtech reveals the full-sized sister of the OSUB 40W, the SMOK OSUB Plus 80W kit ($49.90 from VapeSourcing). It comes with Brit Beast Tank (not to be confused with Baby Beast Tank) but it does use the same Q2 coil heads. So basically, they are interchangeable. The mod itself goes to 80W and also does temperature control for Stainless Steel, Nickel, and Titanium. In this review, we will go over the functions, its overall design, and how to use it.



The SMOK OSUB Plus 80W mod measures 75mm by 54.5mm by 25mm which is slightly bulkier than the OSUB 40W. On front-side of the mod, you’ve got the menu screen, two menu buttons, and a USB port for charging and upgrading. At the top, you’ve got spring-loaded 510 pin connection. At the base, you’ve got 10 ventilation holes and a reset hole which gave you the option to reset the mod to its factory setting. On the front, you’ve got the firing bar mechanism which is very comfortable and clicky to use, and probably one of my favorite feature of this mod.

Unlike the firing bars of the Alien 220W or the H-Priv. The firing bar of the OSUB Plus 80W is halfway activated meaning only half of the entire bar mechanism fires up when firmly press and the other half won’t. This is a good feature since it can cause a disturbing rattling sound if the entire bar presses firmly. Because of this feature, I can’t hear any rattling sound and it is comfortable when firing up.


Brit Beast Tank (From Left to Right): Adjustable airflow, Atomizer Base, 0.4ohm Q2 Dual coil atomizer, Glass tube, Top fill cap, Drip tip.

In regards to the sub-ohm tank, the Brit Beast has a diameter of 24.5mm by 43mm in length with 39g in weight. It has an e-Liquid capacity of 3.5ml. Which is substantially large from its size. It is made from stainless steel and glass and is available in two colors; stainless steel and black. The Q2 coil head on this tank has a resistance of 0.4ohm with a wattage range at 40 – 80W. Note that all TFV8 Baby Beast coil heads are compatible with the Brit Beast tank.

What’s in the Kit?

In the packaging, you will receive the SMOK OSUB Plus 80W mod, you also receive Brit Beast tank with 0.4ohm pre-installed Q2 baby beast coil head, it also includes an extra baby beast 0.4ohm Q2 coil head, an extra glass tube, includes extra O-rings, and last but not the least a USB cord for charging and upgradable firmware.

How to use SMOK OSUB Plus 80W Mod

To access the Menu of the SMOK OSUB Plus 80W mod, just rapidly press the firing bar 3 times. There are a lot of shortcuts to this device making it simple and comfortable to use, such as:

To turn the device Off: Just long press the firing bar for 5-6 sec and eventually the menu to power Off the device pop-up. Freely choose the off option.

To lock/unlock the mod: Rapidly press the firing bar 5 times. Vice versa to unlock the device.

To interchange from 5 different output modes: Hold down the plus button and fire button at the same time. You can adjust the ramp settings from a slow ramp Min setting, Norm, Soft, Hard, to a high power Max setting.

To interchange from wattage mode to temp control mode (vice versa): Hold down the minus button and fire button at the same time.

In wattage mode, the device goes from 1 to 80W which has increments of 0.1. Holding down the menu buttons will make the increments go faster by 1 degree. In Temp Control mode, it goes from 100C – 315C / 200F – 600F which has increments of 5 degrees.

How to fill Brit Beast Tank


  1. Brit Beast tank uses top refill system, you just need to hold the tank with one hand, and use another hand to unscrew its drip tip.
  2. Add your favorite e-Liquid through the two slots, be sure not to drip any e-Liquid into the central airflow tube.
  3. Close the cap carefully and firmly. Then let it sit for several minutes to get the cotton completely saturated.

Final Verdict

There are only few cons on this tank that are worth to mention. Such as spit back at first use but eventually diminishes the next time you refill it. Speaking of first used, it could be a challenge to some when opening the drip tip to fill the tank, it is sealed tightly. The other con is that you can’t use your own standard 510 drip tip on this tank. So you will be forced to use the V-shape drip tip that is included in the tank. This might be a big con to some but it didn’t bother me at all. Hence, the tank for me still performs amazing and the best part is, it is compatible with all the coil heads of the baby beast.

Other than I mentioned above, the kit is perfectly good. The mod has a great fire bar which I really love. It features 3300mAh battery which has a pretty decent battery life that can last you for a reasonable amount of time. Very well-built and comfortable in your hands. I totally recommend this to those users who are looking for a 60 – 80W mod. This will be a perfect mod for you. But if you are still looking for other choices. We already done the research for you. Check out our Best Vape Mods this year.

Where to buy the SMOK OSUB Plus Kit:

I recommend buying the SMOK OSUB Plus Kit from VapeSourcing. They offer Great Deal and Money Back Guarantee.

Smok OSUB Plus Kit Vaporizer

Buy the SMOK OSUB Plus Kit from VapeSourcing




Join over 8,000 vape-insiders that currently get an exclusive discount on most major US brands and Online Vape Stores. We’ll also keep you up to date with new product releases, and money-saving deals for the latest and best vaporizers ??.


Signup Location


Find out more

1 Comment
  1. Reply
    Sandi January 6, 2017 at 3:54 pm

    Sorry auto correct is crazy. Using SMOK Osub 80 system. Dropped & it started vaping super hot. Could I have broken something internally? I lowered temp to 200c & it seems better. Just changed coil yesterday.

Leave a reply

Register New Account
Reset Password