Kanger DRIPEZ Starter Kit is a unique product from Kangertech, which features an e-Juice pump bottle that connects directly from the DRIPEZ RBA using a tube. Which stores 15ml/16.5ml of e-liquid and delivers it directly into the cotton without any hassle. It also features a variable wattage output from 5 to 80 watts and also supports Nickel 200, Titanium and Stainless Steel wire in temperature control mode.
Recommended store: Buy from an Authorized Dealer - VaporDNA.
The Kangertech DRIPEZ Kit is pre-order as of now on VaporDNA website
Kanger DRIPEZ Review:
Kangertech introduces us with a unique product that features a Unique Juice Pump Delivery System or “Squonk”. A similar technology found in Kanger Dripbox Kit, except this time it’s a glass bottle that you should pump and not a plastic bottle to squeeze the eJuice reserve.
Unique Juice Pump Delivery System or Squonk
Kanger was able to construct before a better method of filling an RBA with e-Juice without any hassle, through the method called Squonk. But it seems the squeezable bottle wasn’t good enough in Dripbox Kit, so they are able to construct a better material to utilize this method by using a pump cap bottle.
Contained within the DRIPEZ Mod is a large glass bottle with a pump cap which connects to a tube that sends the e-Juice right to the RBA. An easy and fancy way to wet your wick with e-Juice without the traditional fills.
Rebuildable Atomizer “RBA”
Another cool feature about the Kanger DRIPEZ is its rebuildable coils it has a SCREWLESS Clap Post Deck for easier replacing cotton wicks. You may press down on the Clap Posts to release and change your wicks. No need to hassle yourself with screws anymore due to this screwless design. The DRIPEZ supports replaceable 0.2ohm cotton kanthal drip coils which are easily replaced or can be rebuilt to your own personal preferences.
Note: Rebuildable Atomizer (RBA) coils and wicks have known risks. RBAs are for experts, not average or beginner vapers with no multimeter or knowledge on how to use a meter, or when a meter must be used, or how electronic devices work. These materials cannot safely be used by the inexperienced or those without basic knowledge of electronics.
Like Dripbox Kit the Kanger DRIPEZ Mod can be also used with ANY 510 threaded tank.
Sold in Silver or Black, the DRIPEZ features a variable wattage output from 5 to 80 watts and also supports Nickel 200, Titanium and Stainless Steel wire in temp control mode. The DRIPEZ requires one (1) 18650 battery (which customers are responsible for installing) and features a Micro USB port for firmware upgrade from 80W to 100W.
Kangertech DRIPEZ Summary Specification
- Dimensions: 5″ x 2-1/4″ x 1-3/16″ (Including DRIPEZ RBA)
- 22mm Diameter
- 510 Threaded
- Unique Juice Pump Delivery System or Squonk
- Replaceable 15ml/16.5ml Glass Bottle
- Temperature Control
- Variable Wattage Output: 5 – 80W (Upgradeable to 100W)
- Temperature Control : Ni200 / Ti / SS
- Temperature Control Range: 100 – 315C / 200 – 600F
- Resistance Range: 0.1 – 2.5ohm
- Two Post Deck
- Unique Screwless Clamp Post Design (Press Down on Posts to Change Coils)
- Use Pre-built Kanthal 0.2ohm drip coils or build your own
- Adjustable Airflow
- Zinc Alloy Construction
- Requires (1) 18650 High Amp Battery (Sold Separately)
- Micro USB Charging Port
- Low Resistance Protection
- Low Battery Warning Indicator
- High-Temperature Protection
Kangertech DRIPEZ Kit includes
- 1 x Kangertech DRIPEZ
- 1 x Drip EZ RBA Preinstalled Kanthal 0.3ohm Coil
- 1 x Replacement Drip Coil 0.2ohm
- 1 x Spare Juice Pump Bottle
- 2 x Prebuilt Coils
- 1 x Micro USB Cable
Where to buy?
For this product, it is not yet available in the market and even you place a pre-order now, you probably have to wait on the waiting list.
The Kangertech DRIPEZ Kit is pre-order as of now on VaporDNA website. I recommend purchasing the Kangertech DRIPEZ from VaporDNA once it will be released.